DOWNLOAD DRIVER: FLUKE USB INTERFACE
FLUKE USB INTERFACE DRIVER DETAILS:
|File Size:||16.2 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other|
|Price:||Free* (*Free Registration Required)|
FLUKE USB INTERFACE DRIVER
The LR4 makes possible high precision, true time-of-flight laser range finder technology in an affordable package.
Laser rangefinders are vastly superior to ultrasonic rangefinders, which suffer from problems caused by their wide beam pattern. Narrow objects often appear much wider than they are because of the 20 to 30 degree sense angle of ultrasonic. IR sensors, such Fluke USB Interface those based on the Sharp GP2D12, have limited range around 3 feetnon-linear output, and are very imprecise.
Fluke Serial to USB Interface Cable, 1.5-Meter
When you order the LR4 you will receive a kit that includes the two flex cables that are needed to connect the LR4 to a Fluke D. Purchase a Fluke D many online sources. Fluke USB Interface the D's battery wires and plug them into the LR4. This video demonstrates the assembly process.
Mark: Build a USB to Fluke IRusb (Infrared Radiation) Interface
Using a Fluke USB Interface of sanding paper this is possible, but tedious. The alignment of the optical board IR detector and diode inside the Scopemeter connector is critical.
Diode and detector should be close to the mirror which is found inside the Fluke. They should be sticking straight in into the connector holes, without being tilted at an angle. Fluke USB Interface
Fluke OC4USB USB Interface Cable for Scope Meters and Power Quality Meters
Here's a pic of the finished board: The standard Windows HyperTerminal might work too. You can use the program to send a command to the scopemeter and Fluke USB Interface see if anything happens.
There's also a keypress simulation command only for the series. This is a command not documented in the above reference. Get an overview of every project Fluke USB Interface any smart device. Drill down to each individual test.
- FLUKE Fluke Fluke IR Thermometer, USB interface RS Components
- Product Fluke USB Interface Cable - USB cable
- Fluke SCC190 Carrying Case, FlukeView Software & Optically Isolated USB Interface Cable
- Shop by category
- Fluke OC4USB Oscilloscope
Instantly receive Fluke USB Interface of incorrect test setting or cable IDs. Get it right the first time. Define cable IDs and test settings from your PC or tablet.
|Asus CMOS Camera D-Max||You are here|
|Sager NP2092 RICOH Card Reader||About this product|
|Eurocom Neptune 2.0 AMD Graphics||About this product|
Then send them to the testers or Brother printers at the jobsite for mistake-free testing and labeling. Keep your testers up to date.
Standards can change without notice, and an out-of-date test report can mean hours of re-testing. Safety-designed interface cable to connect the optically-isolated serial interface port of ScopeMeter or Power Quality Analyzer to a standard USB-interface on.
Safety-designed interface cable to connect the optically-isolated serial interface port of Scopemeter or Power Quality Analyzer to a standard USB-int.